Yamaha YSP-1 - Manual (Page 56)

USING THE SLEEP TIMER
50
Use this feature to automatically set this unit in the standby mode after a specified time period. The sleep timer is useful
when you are going to sleep while this unit is playing a source.
■ Setting the sleep timer
1
Select a source and start playback on the
source component.
2
Press SLEEP repeatedly to set the amount of
time until this unit goes into standby mode.
Each time you press SLEEP, the front panel display
changes as shown below. The SLEEP indicator blinks
while switching the amount of time for the sleep
timer.
3
Press RETURN, or wait a few seconds
without operating this unit.
The SLEEP indicator lights up in the front panel
display, indicating that the sleep timer is set.
■ Canceling the sleep timer
You can deactivate the sleep timer setting as follows.
1
Press SLEEP repeatedly until “SLEEP OFF”
appears in the front panel display.
2
Press RETURN, or wait a few seconds
without operating this unit.
The SLEEP indicator goes out, and the sleep timer is
deactivated.
y
The sleep timer setting can also be deactivated by pressing
STANDBY/ON, or by unplugging the power cable from the AC
outlet.
USING THE SLEEP TIMER
RETURN TEST
TV VOL VOLUME
MUTE
TV MUTE
TV INPUT TV DVD
AUX VCR SLEEP
SLEEP
SLEEP
SLEEP 120min
SLEEP 90min
SLEEP 60min
SLEEP 30min
SLEEP OFF
RETURN
SLEEP
SLEEP
SLEEP OFF
RETURN SLEEP
Goes out