Zephyr AK7548ASX - Manual (Page 14)

12
www.zephyronline.com
HORIZONTAL DUCTING IS ONLY AVAILABLE IF USING THE
CBI-290B / CBI-600B SINGLE INTERNAL BLOWER.
1. Unscrew (4) screws holding blower to plate and
remove blower.
2. Cover round blower opening on blower plate
with 6” round metal cap included with the
CBI-xxxB. Secure with (3) 3.5x8 screws.
4. On the back of the hood, remove the (6) screws
holding the rectangular cap to the hood.
5. Place round to rectangular transition adapter
inside hood.
Installation –
CBI-xxxB Horizontal Ducting Conversion
3. Follow instructions on previous page and install
blower plate into hood.