Features & controls – t ouch controls – Zephyr AK7548ASX User Manual
Page 18
16
www.zephyronline.com
Baffle Filter Clean Reminder
Whether your hood is installed as an exhaust or purifying unit, a set if baffle filters are fitted by the factory,
These baffle filters are intended to filter out residue from cooking. They need not be replaced on a regular
basis but are required to be kept clean. The filter clean reminder function in the microprocessor will
automatically indicate by a flashing when the baffle filters need to be cleaned after every 30 hours of
use. Filters can be cleaned by hand with non-abrasive soap or in a dishwasher. Heavily soiled filters
should also be soaked in grease cutting detergent prior to cleaning.
Baffle Filter Clean Indicator
When flashes on display, the baffle filters
installed are required to be cleaned. This will occur
after every 30 hours of use.
Re-setting Function
Reset the filter clean reminder timer when filters are
cleaned and re-installed (with hood off). Press and
hold for approximately 5 seconds, the display will
appear; hold for approximately 5 seconds until on
display disappears . The filter clean reminder
function is now reset and a new 30 hours elapse
cycle is initiated.
F
Clean Filters
display < F > flashes
F
hold 5 sec.
display from < F > to < >
To Reset
F
F
F
To enable Clean Air Feature
With hood off, press and hold for approximately 5
seconds until the display shows then .
To disable Clean Air Feature
With hood off, press and hold for approximately 5
seconds until the display shows then .
A
-
Clean Air Feature
Clean Air is a feature that turns the fan on every 4 hours for 10 minutes to remove stagnant air in the kitchen.
This feature is disabled by default and must be enabled by the user. When the clean air function is enabled,
the blower will turn on speed 1, the display will flash between and until the 10 minute cycle has
elapsed and the blower shuts down.
1
-
hold 5 sec.
display from < - > to < A >
To Enable
A
A
-
A
- -
hold 5 sec.
display from < A > to < - >
To Disable
A
Features & Controls –
T
ouch Controls