ZyXEL Communications P-660H-TX - Manual (Page 42)

P-660H-Tx v2 Support Notes
5. Using Full Feature NAT
When P-660H-Tx v2 is in Routing mode, you can select NAT Option as
Full Feature in Network -> General ->NAT Setup
Key Settings:
Field Options Description
Full Feature
When you select this option you can select
Address Mapping Set Number 1~8 in the
pull-down menu on the right.
Network Address
Translation
SUA Only
When you select this option, this remote node will
use default SUA Address Mapping Set. You can
see it in CLI by command ‘ip nat lookup 255’. It’s
a read-only set with two rules: Many-to-One and
server mapping. Select Full Feature when you
require other mapping types.
Configuring NAT
Address Mapping Sets and NAT Server Sets
41
All contents copyright © 2006 ZyXEL Communications Corporation.