ZyXEL Communications P-660H-TX - Manual (Page 59)

P-660H-Tx v2 Support Notes
'public'.
Trap
Destination
Enter the IP address of the NMS that you wish to send the traps to. If
0.0.0.0 is entered, the P-660H-Tx v2HW-DX will not send trap any
NMS manager.
Note: You may need to edit a firewall rule to permit SNMP Packets.
8. Using syslog
You can configure it in Web Configurator, Advanced Setup, Maintenance ->
Logs -> Log Settings -> Syslog logging.
Key Settings:
Active: Select it to active UNIX Syslog.
Syslog IP Address: Enter the IP address of the UNIX server that you wish to
send the syslog.
Log Facility: Select from the 7 different local options. The log facility lets you
log the message in different server files. Refer to your UNIX manual.
9. Using IP Alias
• What is IP Alias ?
In a typical environment, a LAN router is required to connect two local
networks. The P-660H-Tx v2 can connect three local networks to the ISP or a
remote node, we call this function as 'IP Alias'. In this case, an internal router
is not required. For example, the network manager can divide the local
network into three networks and connect them to the Internet using P-660H-Tx
v2's single user account. See the figure below.
58
All contents copyright © 2006 ZyXEL Communications Corporation.