Xantrex Technology IP1012 AL - Manual (Page 23)

Using the Remote Switch
975-0337-01-01 2–9
Using the Remote Switch
Switch settings The switch shown in Figure 2-3 is used to disable the inverter. The
charger is always on as long as shorepower is connected regardless of the
switch position.
If the switch is … The inverter is …
On Providing AC to the outlets when there is no
shorepower and the battery voltage is acceptable.
Off Providing pass-through AC to the outlets only if
there is shorepower. The inverter is disabled and
will not provide AC power in the absence of
shorepower.
Figure 2-3 Remote switch with indicator lights
On Off
Switch
Indicator
lights
1
2
3
IP1012_AL.book Page 9 Tuesday, May 1, 2007 12:18 PM