Xerox 6204 EN - Manual (Page 120)

10 Main Menu
114 Wide Format Copy System User Guide
FINISHER
MODEL:
NONE
Finisher Screen
NOTE: This screen identifies the Finisher, if any. If there is no finisher, the MODEL is displayed
as NONE. If a Folder is connected, the FINISHER screen displays the configuration of
the connected Folder.
7. Press the Exit key to return to the SYSTEM DESCRIPTION screen.
Recent Fault List
The RECENT FAULT LIST option of the SYSTEM INFORMATION menu displays the most
recent faults related to the Scan System. Fault messages are stored in the Controller. Each fault
message contains a fault code and a digital time stamp. When you call for service, the service
center may ask you for this information.
To display the recent fault list:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Next key to highlight SYSTEM INFORMATION.
3. Press the Enter key to select SYSTEM INFORMATION. The SYSTEM
INFORMATION menu screen is displayed.
4. Press the Next key to highlight RECENT FAULT LIST.
Press the Enter key to select RECENT FAULT LIST. The RECENT FAULT LIST
screen is displayed. Below is an example of the RECENT FAULT LIST screen. The
first column is the time given in seconds since January 1, 1970. That's what is used
to determine the actual system date and time.
5. Go to the Problem Solving section of this document to look up the second column’s
fault code.
RECENT FAULT LIST
37449914 50000008
37449868 50000008
Recent Fault List Screen
6. Press the Previous or Next key to scroll through the list.
7. Press the Exit key to return to the SYSTEM INFORMATION menu screen.