Xerox 6204 EN User Manual
Page 143
10 Main Menu
Wide Format Copy System User Guide
137
DOCUMENT MOTOR
MOTOR: OFF
SPEED:
.125
DIRECTION: FORWARD
Document Motor Screen
10. Turn the motor on.
a) Press
the
Previous
or Next key to highlight MOTOR.
b) Press
the
Enter
key to confirm your selection.
c) Press
the
Previous
or Next key to select ON. The choices are ON and OFF.
d) Press
the
Enter
key to confirm your selection.
11. Select the motor speed.
a) Press
the
Previous
or Next key to highlight SPEED.
b) Press
the Enter key to confirm your selection.
c) Press
the
Previous
or Next key to select the desired motor speed. The choices
are .125, .250, .500, .750, 1, 1.5, 2, 3 and 4.
d) Press
the
Enter
key to confirm your selection.
12. Select the motor direction.
a) Press
the
Previous
or Next key to highlight DIRECTION.
b) Press
the
Enter
key to confirm your selection.
c) Press
the
Previous
or Next key to select the desired motor direction. The
choices are FORWARD and REVERSE.
d) Press
the
Enter
key to confirm your selection.
13. Press the Start key to activate the motor.
14. Press the Exit key to return to the COMPONENT TESTS menu screen.
Calibration Motor
Select the CALIBRATION MOTOR option to set the calibration zone motor.
To run the CALIBRATION MOTOR diagnostic:
1. Press
the
Menu
key. The MAIN MENU screen is displayed.
2. Press
the
Next
key until DIAGNOSTICS is highlighted.
3. Press
the
Enter
key to select DIAGNOSTICS. The DIAGNOSTICS menu screen is
displayed.
4. Press
the
Next
key until SCANNER DIAGNOSTICS is displayed.
5. Press
the
Enter
key to select SCANNER DIAGNOSTICS. The SCANNER
DIAGNOSTICS menu screen is displayed.
6. Press
the
Next
key until COMPONENT TESTS is highlighted.
7. Press
the
Enter
key to select COMPONENT TESTS. The COMPONENTS TESTS
menu screen is displayed.