Xerox 6204 EN - Manual (Page 69)

Wide Format Copy System User Guide 63
6 Scanning when using a Folder
Scanning when using a Folder
When using a Folder, the document must be inserted in the correct orientation in order to have
the title block visible after the copy is folded. Refer to the Finisher key information in the Special
feature keys section of this manual for additional information to set up the desired fold and other
Finisher options. Documents larger than 80 inches (2.1M) can only be partially folded.
When using the Reduce/Enlarge feature and a Folder, you must orient and insert the document
title block in the same orientation as the resulting enlargement or reduction copy size. In addition,
the recommended media should be used.
For example: the job requires that an A (A4) document be enlarged to a C (A2) document. To
have the title block visible after folding, the A (A4) document must be inserted as if it were a C
(A2) document.
You may want to refer to CUSTOM R/E PRESETS in the Main Menu, COPY OPTIONS section,
and set up the REDUCTION/ENLARGEMENT default to show the standard reduction and
enlargement. Set the reduction /enlargement to display A to C (A4 to A2) above the keys.
To ensure that the selected fold is made correctly, it is critical that the document be centered on
the Scan System Document Feed Tray when scanning.
For additional folding and title block positioning information, refer to the Folder Operator Manual
or the Folding Supplement CD.