Xerox 6204 EN - Manual (Page 43)

2 Getting to know the Wide Format Copy System
Wide Format Copy System User Guide 37
Powering the Xerox 6204 Wide Format Solution On/Off
The following describes the procedure for powering the Xerox 6204 Wide Format Solution with
FreeFlow Accxes Print Server on and off.
Powering On the System
1. Move the printer circuit breaker switch up, to the On [ | ] position.
2. Move the printer power switch to the On [ | ] position.
3. Press the power button on the front of the controller.
The power button lamp will illuminate. After about one-half minute, the control panel will display
the message Printer Warming Up. The machine will be print-ready in about three minutes.
CAUTION: Powering down the system incorrectly may result in data corruption and a service
call. The system shutdown procedure below allows the controller to power down correctly.
Shutdown is best performed through the Web Printer Management Tool or the control panel’s
System Administration menu’s [Shutdown] feature. Only authorized persons should power down
the system fully.
Powering Off the System
1. Ensure that all jobs have finished processing, and that the <Transmitting> indicator
on the control panel is not illuminated.
2. Select [Shutdown] from either the control panel or the Web Printer Management Tool.
From the control panel
1. Select the <Log In/Out> button and enter the System Administration password.
2. Select the [Shutdown] button. The [Power Off] screen will display briefly on the
control panel, and then the control panel and the printer will shut down.
Power Button
Circuit Breaker
Printer Power
Switch