3Com WL-560 - Manual (Page 15)

2 I
NSTALLING THE
B
RIDGE
This chapter contains the information you need to install and set up the
Bridge. It covers the following topics:
■
Unpacking the Bridge
■ Observing Safety Precautions
■
Deciding Where to Place the Bridge
■
Connecting the Bridge
■ Checking the LED Indicators
■
Attaching An External Antenna
■ Determining if you Need to Configure the Bridge
■
Using the 3Com Installation CD
Unpacking the
Bridge Make sure that you have the following items, which are included with the
Bridge:
■
Power adapter and power cord.
■ Standard Category 5 unshielded twisted pair (UTP) Ethernet cable.
■ Locking bar (used for securing a wall-mounted installation).
■ Rubber feet (four; used for a flat-surface installation).
■
3Com Installation CD.
For wall-mounting installations, you need the following items, which
are not included with the Bridge:
■
Mounting screws.
■ Plastic anchors (for drywall mounting).
To secure the Bridge using the locking bar, you need a lock (not
supplied).