3Com WL-560 - Manual (Page 20)

14 C HAPTER 2: I NSTALLING THE B RIDGE
Connecting the
Bridge The Bridge has power, Ethernet, and serial ports, as shown in Figure 8.
Before connecting the Bridge to an Ethernet device, connect the power.
Figure 8 Connecting the Power
Connecting to a
Serial Device
The Bridge can also be connected to a serial device, as shown in Figure 9.
Serial cables come with a variety of connector sizes. If your connector is
large and prevents the cradle from being attached to the Bridge, remove
the end cap on the cradle. This allows the connector to extend through
the cradle.
Figure 9 Connecting a Serial Cable
P ower
C able
E thernet
C able
S erial Cable