Connecting to a network printer, Connecting to a computer – 3Com WL-560 User Manual
Page 22
16
C
HAPTER
2: I
NSTALLING
THE
B
RIDGE
Connecting to a
Network Printer
You can connect a network printer directly to the Bridge or to a hub that
is connected to the Bridge. Used this way, the Bridge allows you to place
network printers in areas that are not wired for Ethernet.
1 Configure the network printer as you would for connecting it to the wired
LAN. For details on configuring the printer, see your printer documentation.
2 If necessary, configure the Bridge to associate with your access point.
3 Connect the Bridge to the power supply in its permanent location.
4 Connect the network printer directly to the Bridge as shown in Figure 11,
or to a hub that is connected to the Bridge as shown in “Connecting to a
Hub” on page 15.
Figure 11 Connecting to a Network Printer
Connecting to a
Computer
You can connect the Bridge directly to a computer through Ethernet as
shown in Figure 12. Used this way, the Bridge can convert a desktop
computer to a wireless computer. This connection also allows you to
configure a Bridge before connecting it to another device.
Figure 12 Connecting to a Computer
.11g
.100
.10
.11a
11
a/b/ g Wireless
W
orkgroup Brid ge
A
ccess
P
oint
PO
W
ER
PO
W
ER
ET
HE
RN
ET
ET
HE
RN
ET
W
IR
EL
ES
S
W
IR
EL
ES
S
.11g
.100
.10
.11a
11
a/b/ g
W
ireless
W
orkgroup
B
ridge
A
ccess
P
oint
PO
W
ER
PO
W
ER
ET
HE
RN
ET
ET
HE
RN
ET
WI
RE
LES
S
W
IR
EL
ES
S