3M MP8650 - Manual (Page 18)

14

3M 1997 3M

Multimedia Projector MP8650
4-9. Setting Apple Macintosh Monitor Mode (Windowed or
Compressed)
The MP8650 should be set to the desired Apple Macintosh monitor mode. Press the RGB button then RESET
button on the remote control to switch between the ON compressed mode or OFF windowed mode. Press
RESET again to switch the ON/OFF setting. ON
⇒
OFF
⇒
ON .
Note
In the compressed mode (ON), an 832 x 624 image
is fully displayed by the 800 x 600 projector format.
In the windowed mode (OFF), you will need to
scroll the display to see the full 832 x 624 image.
4-10. Menu Languages
The MP8650 will display on-screen menus in the following languages:
D English
D French
D Spanish
Press the VIDEO button then the RESET button on the remote control to switch the displayed language.
Press RESET again to switch to the next language. English
⇒
French
⇒
Spanish
⇒
English.
4-11. Turning Off the Projector
Press the STANDBY/ON button (remote control keypad or projector control panel) to switch the
projector to the standby mode. The lamp will shut off and the green indicator on the projector panel will turn
to orange. Wait until the cooling fan motor cycles off before you press the Power Off switch (Figure 3-2).
Note
Switching the power off before the fan has cycled
off, will decrease the life of the projection lamp.