Technical specifications, 1. specifications, 2. s-video input signal terminal – 3M MP8650 User Manual
Page 24
20
3M 1997
3M
Multimedia Projector MP8650
Section 9: Technical Specifications
9-1. Specifications
Width
28.1 cm (10.95 inch)
Height
35.6 cm (13.88 inch)
Depth
48.6 cm (18.95 inch)
Weight
14 kg (30.94 lbs)
Panel size
8.1 cm (3.2 inches)
Number of pixels per panel
480,000 pixels (H800 X V600), 3 panels = 1.44 million total pixels
Dot defect
< 0.011% of total pixel count
Zoom lens
1.6:1
Metal halide lamp
350W, rated at 1000 hours to half brightness
(110V–user can replace lamp, 220V–lamp must be replaced at service center)
Power supply
AC90-132V, 50/60Hz
AC170-260V, 50/60Hz
Power consumption
Maximum 470W (typical)
Storage temperature range
–20
°
C to 60
°
C (–4
°
F to 140
°
F)
Operating temperature range
0
°
C to 35
°
C (32
°
F to 95
°
F)
Input terminals
S-Video: Mini DIN4-pin terminal
Video: RCA jack
Audio: RCA jack
Computer (RGB): D sub15-pin HD terminal
Input signals
S-Video: Luminance 1.0V peak-to-peak , 75
Ω
termination
Chroma 0.286V peak-to-peak (burst signal) 75
Ω
term.
Video: 1.0V peak-to-peak, 75
Ω
termination
Audio: 260mvRMS, across 46k
Ω
Computer (RGB1/RGB2): 0~0.7V peak-to-peak, 75
Ω
RGB (computer) input
Audio: RCA jack
Output terminals
Computer (RGB): D sub15-pin HD terminal
Audio: RCA jack
Output signals
Monitor: 0~0.7V peak-to-peak, 75
Ω
Audio: 7V peak-to-peak or less, 680
Ω
termination
Batteries for remote control
Three AAA, 1.5 Volt
9-2. S-Video Input Signal Terminal
The following illustration (Figure 9-1) identifies the terminal connections for the Mini DIN4-pin.
Luminance
Signal
Chrominance
Signal
Ground
Ground
Figure 9-1. S-Video Input (Mini DIN4-pin)
Video input signal terminals are detected by the MP8650 in the following order of priority:
D
S-video input terminal
D
RCA jack input terminal