3M MP8650 - Manual (Page 7)

3

3M 1997 3M

Multimedia Projector MP8650
Section 1: Unpack
1-1. Contents of Shipping Box
The 3M

Multimedia Projector MP8650 is shipped with the necessary cables required for standard VCR, PC,
Apple Macintosh or laptop computer connections. Carefully unpack and verify that you have all of the items
shown below in Figure 1-1.
MP8650 Projector Remote Control Transmitter
Video Cable
(S-Video mini DIN4-pin)
Lens Cap
Power Cord
(US, Euro, UK) VGA Cable
(15-15 pin M/M)
Apple Macintosh Adaptor
3-Conductor
Video/Audio Cable
S-VGA
832 x 624
(Black) VGA
640 x 480
(Grey)
PC Serial Cable
Figure 1-1. Inventory of Shipping Box
1-2. Inventory List
The shipping carton contains the following items illustrated in Figure 1-1. If any of these items are missing,
please contact your place of purchase.
D MP8650 Multimedia Projector
D Remote control transmitter
(AAA batteries included)
D Lens cap
D Apple Macintosh adaptor (S-VGA, VGA)
D 3-Conductor video/audio cable
D VGA cable (15-15 pin male to male)
D Video cable (S-video mini DIN4-pin)
D Power cord
D PC Serial cable
D Operator’s Guide (not shown in Figure 1-1)
Note
To operate the Apple Macintosh mouse button functions
via the MP8650 remote control transmitter requires the
Apple Macintosh Mouse Receiver (accessory part). See
Section 10 to order.
1-3. Keep Your Packing Materials
Save the shipping box and packing materials in the event the MP8650 should require shipping to a 3M Service
Center for repair. The zoom lens should be completely retracted before shipping this product.
1-4. What’s Next?
After you have unpacked the MP8650 system and identified all the parts, you are ready to set up the projector.
Take a few minutes to review Section 2 to familiarize yourself with the MP8650 machine characteristics and
then turn to Section 3 to set up the projector.