3M MP8650 - Manual (Page 30)

A–4

3M 1997 3M

Multimedia Projector MP8650
A–2. Serial Command Codes, continued
Function Code Meaning
Attribute Memory Write Codes
D10W00
D10W01
D10W02
D10W03
D11W00
Read Codes
D10R
Set to Default
Set to Memory 1
Set to Memory 2
Set to Memory 3
Store current settings in current memory
Returns:
00 – Default
01 – Memory 1
02 – Memory 2
03 – Memory 3
Color (Saturation) Write Codes
D15W00 to D15W14
Read Codes
D15R
Sets color (saturation) level to a value between 00 and 14
hex. This corresponds to 20 possible settings.
Returns:
00 to 14 hex
Sharpness Write Codes
D16W00 to D16W03
Read Codes
D16R
Sets sharpness level to a value between 00 and 03 hex.
This corresponds to 4 possible settings.
Returns:
00 to 03 hex
Gamma Correction Write Codes
D17W00 to D17W14
Read Codes
D17R
Sets gamma level to a value between 00 and 14 hex. This
corresponds to 20 possible settings.
Returns:
00 to 14 hex
Coring Write Codes
D18W00
D18W01
Read Codes
D18R
Coring off
Coring on
Returns:
00 – Coring is off
01 – Coring is on
P–Clock Write Codes
D31Waaaa
Read Codes
D31R
The aaaa corresponds to the actual P–Clock number in
hex.
Returns:
4 digit P–Clock number in hex
Phase Write Codes
D34W00 to D34W7F
D35W00
Read Codes
D34R
Set phase to a value in the range of 00 to 7F hex.
Reset phase to default
Returns:
00 to 7F
Timer Reset Write Codes
D60W00
Read Codes
D60R
Reset the accumulated operating time to 0
Returns:
0000 to 9999 decimal value of operating hours