3M MP8650 - Manual (Page 9)

5

3M 1997 3M

Multimedia Projector MP8650
Section 3: Set Up
3-1. Cable Connections
It only takes a few minutes to connect the 3M

Multimedia Projector MP8650 to your computer, VCR or other
video device (Figure 3-1).
Laptop or Desktop
Desktop or Laptop
Laserdisc or VCR
(S-VHS output)
VCR (VHS output)
Electric Outlet
Sound System
Figure 3-1. Typical Cable Configuration
Terminal Connection Panel
Take a moment to look over the input connection terminals (Figure 3-2) on the back of the projector. Connect
your first RGB or Video input source to terminal #1 and your second input source to the terminal #2.
Terminal connectors for Computer1 (RGB1) and Computer2 (RGB2) are: RGB, Audio-L, Audio-R.
Terminal connectors for VIDEO/AUDIO 1/2 are: S-Video, Video, Audio-L, Audio-R.
Terminal connectors for MONITOR OUTPUT are: RGB, Audio-L, Audio-R.
Terminal connector for a PC serial mouse is the RS232C. Apple Macintosh computers require a mouse
receiver (accessory part).
Figure 3-2. Input Connection Terminals