3Com ADSL Modem Ethernet - Manual (Page 45)

CLI Commands A-7
HELP
help <command> Provides information about possible commands and their formats. Typing help
alone lists the possible commands. Typing help <command name> lists the
possible parameters for that command.
Typing part of a keyword (command or parameter) and pressing Esc completes the
keyword. If you have not yet entered enough of the keyword to be unique,
pressing Esc causes the bell to ring.
Typing ? after a command string displays the possible keywords and values for
that command.
HISTORY
history Displays your previous CLI commands. You can recall commands from the history
using ^P ( C-P) to recall commands up the list, and ^N ( C-N) to recall commands
working down the list. The default depth is 10 commands. You can modify the
history depth using the set command history command.
idle timout <minutes> Sets the CLI inactivity timeout period. If the CLI is idle for the idle timeout period,
and if CLI password protection is enabled, the CLI password must be re-entered
before any commands can be executed.
LIST
list bridge
access_mac_addresses
Lists the contents of the the Access MAC Table. When the Access MAC feature is
enabled, only MAC Addresses in the Access MAC Table will be bridged.
list bridge forwarding Displays the forwarding and filtering information
MAC address - A unicast MAC address for which the bridge has forwarding
and/or filtering data
Status - One of:
other - not one of the following
invalid - aged out
learned - learned, and in use
self - statically defined, and in use
mgmt - unknown, but filtering information exists
RxPkt - Number of packets received from this MAC station
RxOctets - No. of bytes (octets) received from this MAC station