3Com ADSL Modem Ethernet - Manual (Page 53)

CLI Commands A-15
set time <time> Sets the system time, and leaves the date unchanged. Use show date to see what
the current settings are. The format is: hh:mm:ss. The seconds field is optional.
set user <user_name> message [“message”]
password [password]
session_timeout [seconds]
tcp_port [tcp_port]
terminal_type
Modifies user parameters.
SHOW Show commands display details about system entities.
show adsl
configuration
Displays the current status of the command-line configurable ADSL chipset items.
■
Option register - the OPTN CMV value to on the next reset of the ADI chipset.
■
PSDM config register - the ADSL maximum power spectral density setting.
show adsl performance Displays ADSL error statistics. The following statistics and counters are collected in
15-minute interval bins:
■
Loss of framing errors
■
Loss of power errors
■
Errored seconds
■
Loss of signal errors
The statistics are displayed for the following time periods:
■
Current 15-minute interval
■
Previous 15-minute interval
■
Current day
■
Previous day
■
Total
Parameters Description
<user_name> Name of user, previously defined using add user. Limit of 32 char acters.
message Message presented to a dial-in user.
password User’s password, up to 15 ASCII characters. Value is required.
session_timeout Interval before timing out a session.
tcp_port TCP Port number for the Telnet session.
Terminal_type The type of the terminal. This is an alphanumeric string, of up to 64
characters.