3Com V7000 - Manual (Page 60)

60 C HAPTER 6: S TANDARD F EATURES
To configure a speed dial number using the Program button and the
Speed Dial menu:
1 Press the Program button.
The Main menu appears.
2 Press [3] to access the Speed Dial menu.
The Display Panel lists the first speed dial:
Speed dial 1
:
If the speed dial is already configured, the Display Panels show the
configured number, for example:
Speed dial 1
:
1001
To locate the speed dial number you want to configure, press the
speed dial number (1 through 9) or use the up and down scroll
buttons
If you assign a number to a speed dial that does not have a
corresponding Access button, you can speed dial the number only by
entering the appropriate feature code.
3 Press the # button, then enter the number you want to associate with this
speed dial. Include all prefix numbers that you would normally dial, such
as a 9 or 8 or 1 to access an outside line, and, if necessary, the country
code or area code.
4 To store the number, press the # button.
Make sure you write the name of the person whose number you have
stored and the corresponding Speed Dial Access button or feature
code.
Alternately, you can configure personal speed dial numbers by following
these steps:
1 Press the SA line button.
2 Enter *601* + <speed dial index number 1 - 9> + * + <extension>.
3 Press the # button to store the number.
Example: SA button + *601*2*12345 + #
Editing Personal
Speed Dial Numbers
You can change or delete any personal speed dial number that you
previously configured using the Telephone User Interface.