3M Multimedia Projector X62w - Manual (Page 44)

44
3. How to use Projector software – Basics -
This section explains how to use the “MIU Live Viewer”.
3.1 How to use “MIU Live Viewer”
3.1.1. Install “MIU Live Viewer”
In order to use the projector with a PC for Live Mode, you will fi rst need to install
the accompanying software on all the PCs you will be using.
• OS: Windows 2000 Professional Service Pack4,
Windows XP Home Edition/Professional
• Graphic Interface: DirectX 6.1a or higher; Video RAM 4MB or higher
(8MB
recommended)
• CPU: Pentium III (600MHz or higher recommended)
• Display: VGA 640x480 or higher (XGA 1024x768 recommended) 65,536
simultaneous colors or higher
• Set your PC’s resolution to XGA or less.
• In some cases, Screen will not be displayed correctly like no displays larger
than XGA portion.
• Images might not been transmitted, caused by OS version or the driver
software for Network Adaptor.
It is highly recommended that OS and the driver should be updated to the latest.
NOTE
Minimum PC Hardware and Software Requirements
• Memory: 64MB or higher (128MB or higher if using Windows XP)
• Available Hard Disk Space: 10MB or higher
• Web browser:
Internet Explorer® (5.5 or higher)
• CD-ROM drive
• PC with PC card slot (PCMCIA Type-II) interface and IEEE802.11g wireless
LAN PC card or PC with USB Interface and IEEE802.11g wireless LAN USB
adaptor.
• Not required for PCs with built-in 802.11g wireless LAN.
• Depending on the type of wireless LAN card and PC you are using, the
projector may not be able to communicate properly with your PC, even if the
PC you are using is equipped with built-in wireless LAN functionality.
Should communication problems occur, please procure a Wi-Fi certifi ed
wireless LAN card.
NOTE
3. How to use Projector software – Basics - 3. How to use Projector software – Basics -