3M Multimedia Projector X62w - Manual (Page 52)

52
3. How to use Projector software – Basics -
(3) Click Capture start button.
3.1 How to use “MIU Live Viewer” (Continued)
Fig. 3.1.4.d Start capturing
Based on the above operation, if captured picture of PC screen is displayed real
time on monitor connected with projector, it is succeeded. Much easier to connect
if you utilize “One-Click-Communication” function. (Refer to section 2.2.)
This is basic usage. Refer to section 4.1 for further explanation of advanced MIU
Live Viewer usage.
Explain basics of how to utilize “PC-LESS Presentation”.
1) Save JPEG picture fi les into root directory in SD card or USB Memory. Insert
SD card into SD slot on projector or insert USB memory into AUX I/O slot on
projector (
Inserting an SD card and USB memory of the Operator's Guide).
2) Connecting as network refer to section 3 and start the Web Remote Control.
3) Click “THUMBNAIL” button on the Web Remote Control to change projector
mode to “PC-LESS Presentation”. Then thumbnail appears.
To remove the SD card or USB memory,
4) Be sure to perform the REMOVE procedure using the SERVICE item in the MIU
menu ( MIU Menu of the Operator's Guide). When an error dialog appears in the
procedure, please re-perform the procedure after waiting for a while.
5) When you remove the SD wireless network card, be sure to turn the projector off.
6) Remove the SD card or USB Memory. For removing the SD card, remove the
SD card slot cover before, and put the cover back after.
3.2 Utilize “PC-LESS Presentation” – Basic -