3M Multimedia Projector X62w User Manual

Page 49

Advertising
background image

49

3. How to use Projector software – Basics -

1) JPEG Quality

When “MIU Live Viewer” is used, it captures PC screen image. Then that is
compressed as JPEG and sent to projector. By control bar in this tab, you can
set compression rate.

Low (At the far left, Low picture quality): Make JEPG compression rate high.

Screen refresh interval becomes shorter due to low volume
transferred data, but picture quality decreases.

High (At the far right, High picture quality): Make JEPG compression rate

low. Screen refresh interval becomes longer due to high volume
transferred data, but picture quality increases.

[JPEG tab]

Fig. 3.1.3.c “Options”, “JPEG” tab

3.1 How to use “MIU Live Viewer” (Continued)

[Icon in task tray]
To display “MIU Live Viewer” icon in task tray, click “Minimize” button in “MIU Live
Viewer” window. The icon with yellow thunder mark shows that communication is
connected, and it with red cross mark shows that it is disconnected. (Fig. 3.1.3.d
shows while communication is disconnected.)

Fig. 3.1.3.d Icon in task tray

Double click “MIU Live Viewer” icon in task tray to display “MIU Live Viewer”
window.

Advertising