Garmin GNS 530 - Manual (Page 135)

GNS 530(A) Pilot’s Guide and Reference 190-00181-00 Rev. H 7-19
SECTION 7
WPT PAGES
4) Use the small and large right knobs to enter
the position coordinates for the new waypoint
(Figure 7-38).
Figure 7-38 Present Position Field Selected
5) Press the ENT Key to accept the selected
position.
6) The cursor moves to ‘Create?’. Press the ENT
Key to add the new waypoint to memory.
7) Press the small right knob to remove the
flashing cursor.
Creating a new user waypoint by
referencing an existing waypoint:
1) With the User Waypoint Page displayed, press
the small right knob to activate the cursor.
2) Use the small and large right knobs to enter
a name for the new waypoint and press the
ENT Key.
3) Turn the large right knob to highlight the first
reference waypoint (REF WPT) field (Figure 7-
39).
Figure 7-39 Reference Waypoint Field Highlighted
4) Use the small and large right knobs to enter
the identifier of the reference waypoint. The
reference waypoint can be an airport, VOR,
NDB, intersection, or another user waypoint.
Press the ENT Key to accept the selected
identifier.
5) The cursor moves to the radial (RAD) field
(Figure 7-40). Use the small and large right
knobs to enter the radial from the reference
waypoint to the new user waypoint. Press the
ENT Key to accept the selected radial.
Figure 7-40 Radial Field Selected