Garmin GNS 530 - Manual (Page 175)

GNS 530(A) Pilot’s Guide and Reference 190-00181-00 Rev. H 10-15
SECTION 10
AUX PAGES
5) To stop the generic timer, turn the large right
knob to highlight ‘Stop? and press the ENT
Key.
6) To reset the generic timer, turn the large right
knob to highlight the time field. Press the CLR
Key, followed by the ENT Key.
Recording or resetting the departure time:
1) Select ‘Flight Timers’ from the Utility Page,
using the steps described at the beginning of
this section (10.3).
2) Turn the large right knob to highlight the reset
mode field, under ‘Departure Time’. The reset
mode field indicates ‘Pwr-on’ or ‘GS>30kt’.
3) Turn the small right knob to select the desired
reset mode (Figure 10-21). ‘Pwr-on’ records
a departure time when the GNS 530 is turned
on. ‘GS>30kt’ records a departure time once
the GPS-computed ground speed exceeds 30
knots.
Figure 10-21 Departure Reset Mode Window
4) Press the ENT Key when finished.
5) To reset the departure time, turn the large right
knob to highlight ‘Reset?’ and press the ENT
Key.
Viewing, using, or resetting total trip time:
1) Select ‘Flight Timers’ from the Utility Page,
using the steps described at the beginning of
this section.
2) Turn the large right knob to highlight the reset
mode field, under ‘Total Trip Time’ (Figure 10-
22). The reset mode field indicates ‘Pwr-on’ or
‘GS>30kt’.
Figure 10-22 Total Trip Reset Mode Window
3) Turn the small right knob to select the desired
reset mode. ‘Pwr-on’ records trip time, in
hours/minutes/seconds, any time the GNS 530
is turned on. ‘GS>30kt’ records trip time any
time the GPS-computed ground speed exceeds
30 knots.
4) Press the ENT Key when finished.
5) To reset the total trip time, turn the large right
knob to highlight ‘Reset?’ and press the ENT
Key.