Garmin GNS 530 - Manual (Page 155)

GNS 530(A) Pilot’s Guide and Reference 190-00181-00 Rev. H 8-13
SECTION 8
NRST PAGES
To view and quickly tune the frequency for
a controlling agency:
1) Follow steps 1 through 4 on the preceding page
to display the Airspace Page for the desired
controlled or special use airspace.
2) Turn the large right knob to highlight
‘Frequencies?’ and press the ENT Key. (Figure
8-26)
Figure 8-26 Airport Frequency Page
3) Turn the large right knob to scroll through the
list, highlighting the desired frequency.
4) Press the ENT Key to place the selected
frequency in the standby field of the COM
Window (Figure 8-27).
Figure 8-27 Airport Frequency Page
Selected
Frequency
Standby
Frequency
5) Press the COM Flip-flop Key to activate the
selected frequency.
6) To return to the Airspace Page, turn the large
right knob to highlight ‘Done?’ and press the
ENT Key (or press the CLR Key).
7) To return to the Nearest Airspace Page, turn
the large right knob to highlight ‘Done?’ and
press the ENT Key (or press the CLR Key).
8) Press the small right knob to remove the
flashing cursor.