Garmin GNS 530 - Manual (Page 140)

GNS 530(A) Pilot’s Guide and Reference 190-00181-00 Rev. H 7-24
SECTION 7
WPT PAGES
Renaming a user waypoint from the User
Waypoint List:
1) Select the User Waypoint List, as described in
this section.
2) Turn the large right knob to highlight the
desired user waypoint.
3) Use the small and large right knobs to change
the name of the user waypoint (Figure 7-47).
(Enter the new name directly over the old
name.) Press the ENT Key to accept the new
name.
Figure 7-47 User Waypoint Name Selected
4) A ‘rename waypoint’ confirmation window
is displayed (Figure 7-48). With ‘Yes?’
highlighted, press the ENT Key to rename the
selected user waypoint.
Figure 7-48 Rename Waypoint Window
Deleting a user waypoint from the User
Waypoint List:
1) Select the User Waypoint List, as described in
this section.
2) Turn the large right knob to highlight the
desired user waypoint.
3) Press the CLR Key to display a ‘delete waypoint’
confirmation window (Figure 7-49).
Figure 7-49 Delete Waypoint Window
4) With ‘Yes?’ highlighted, press the ENT Key to
delete the selected user waypoint.