Melitta Caffeo CI - Manual (Page 12)

10
4.2 Connection
• Plug the power cable into an appropriate power socket.
Warning!
Danger of fire and electric shock due to incorrect supply voltage,
incorrect or damaged connections and power cable.
– Ensure that the supply voltage corresponds to the supply voltage specified
on the identification label of the appliance. The identification label is on the
right side of the appliance behind the cover (Fig. B, No. 13).
– Ensure that the power socket meets the applicable standards for electrical
safety. If in doubt, contact a qualified electrician.
– Never use damaged power cables (damaged insulation, bare wires).
– During the guarantee period, only have the damaged power cable
replaced by the manufacturer; after the guarantee period only have it
replaced by qualified specialists.
4.3 Switching on for the first time
Note
When switching on the Melitta ® CAFFEO ® CI ® for the first time, only do so
without the water filter.
• Press the ON /OFF button (Fig. A, No. 5), to switch the appliance
on.
→ The rotary switch is illuminated. The prompt to select a language appears
on the graphic display.
• Turn the rotary switch to select the desired language and press it to
save the selected language.
→ The prompt to set the time will appear on the graphic display.
• Turn the rotary switch to select the desired hour and press it to save the
selected hour.
• Turn the rotary switch to select the desired minutes and press it to save
the selected minutes.
→ The prompt to fill the bean container will appear on the graphic display.