Melitta Caffeo CI - Manual (Page 16)

14
6.2 Preparing a cappuccino
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 12).
• Place a suitable vessel under the outlet.
• Push the outlet downwards as far as it will go.
• Connect the
short tube with the outlet and the supplied Melitta ®
CAFFEO ® CI ® milk container (Fig. C) or use the long tube for
conventional milk cartons.
• Press the button for coffee strength to adjust the coffee strength.
• Press the button for cappuccino .
→ The grinding process and coffee dispensing start
now. Dispensing ends automatically when the set
dispensed quantity is reached.
→ The bean symbols indicate the coffee strength. The
dispensed quantity is displayed in millilitres.
• Turn the rotary switch to adjust the dispensed
quantity while the coffee is being dispensed.
→ To stop dispensing coffee before the programmed amount is reached, press
the rotary switch. The appliance will then continue with dispensing the milk.
The appliance warms up for milk dispensing.
→ Milk dispensing will start. Dispensing ends automatically when the set milk
quantity is reached.
• To completely cancel coffee and milk dispensing, press the button for
cappuccino .
• Turn the rotary switch to adjust the milk quantity while the milk is being
dispensed, if required.
• To stop dispensing milk before the programmed amount is reached,
press the rotary switch.
• Carry out the Easy Cleaning programme, if necessary. The appliance
will prompt you to do this automatically (see page 31) OR select
another beverage.
Cappuccino
110 ml 060 ml