Melitta Caffeo CI - Manual (Page 39)

37
ENGLISH
Warning!
The descaling agent can cause skin irritations
Comply with the safety instructions and the dosing information specified on the
descaling agent packaging.
8 Reinsert the water tank.
9 Place a vessel with a capacity of about 0.7 l or
the coffee grounds container under the outlet and
press the rotary switch to continue.
10 Connect the tube to the drip tray and to the outlet
(Fig. D) and press the rotary switch to confirm.
→ The integrated descaling programme is continued.
This stage takes approximately 20 minutes. Water
flows out of the outlet as well as in the interior of
the appliance and into the drip tray through the
tube. The prompt Empty container and tray then
appears on the graphic display.
11 Remove the tube from the drip tray.
12 Empty the drip tray and the coffee grounds
container and then reinsert them.
13 Reconnect the tube to the the drip tray and
replace the vessel under the outlet.
→ The prompt Refill water tank will appear on the
graphic display.
14 Lift the lid of the water tank (Fig. A, No. 6) and
pull the water tank up and out of the appliance.
15 Thoroughly rinse the water tank, fill it to the
max. mark with fresh tap water, and reinsert it.
→ The integrated descaling programme is continued.
This stage takes approximately 5 minutes. Water
flows out of the outlet as well as in the interior of
the appliance into the drip tray. The prompt Empty
container and tray then appears on the graphic
display.
Empty
container
and tray
Descaling
Refill
water tank
Descaling
Empty
container
and tray
Descaling