Melitta Caffeo CI - Manual (Page 33)

31
ENGLISH
Caution!
Never clean the brewing unit in the dishwasher.
• Let the brewing unit drip dry.
• If necessary, remove coffee residues from the surfaces in the interior of
the appliance where the brewing unit is inserted.
• Reinsert the brewing unit into the appliance and turn the handle of the
brewing unit anti-clockwise to the stop to lock.
• Insert the two catches of the cover into the back of the appliance and
swing the cover to the left until it locks into place.
9.3 Rinsing the coffee unit (Rinsing)
The appliance automatically rinses the coffee unit when it is switched on and, if a
beverage has been prepared, when it is switched off. You can also rinse the coffee
unit in between.
• Place a vessel under the outlet.
• Select the Care sub-menu.
• Turn the rotary switch until Rinsing is highlighted and press it to confirm
the selection.
• Turn the rotary switch until Start is highlighted and press it to confirm
the selection.
→ Rinsing begins. Hot water will flow out of the outlet.
9.4 Rinsing the milk unit ("Easy Cleaning" programme)
After each preparation of a beverage with milk, the appliance will prompt you to
rinse out the milk unit (Easy cleaning?).
• Place a vessel under the outlet.
• Press the rotary switch to start the "Easy Cleaning" programme.
• Connect the tube to the outlet and to the drip tray (Fig.
D).
• Press the rotary switch to confirm that the tube is connected.
→ The “Easy Cleaning” programme will start. Water then flows out of the outlet
and into the drip tray through the tube.