Melitta Caffeo CI User Manual
Page 31
29
ENGLISH
Warning!
Danger of burning and scalding from hot steam
The machine releases hot steam when it is vented. Never allow any part of
your body, e.g. your face to come into contact with the hot steam.
• Lift the lid of the water tank (Fig.
A, No. 6) and
pull the water tank up and out of the appliance.
→ The appliance is vented. The appliance then
automatically switches off completely.
8.12 Adjusting grinding fineness
The grinding fineness level was optimally adjusted prior to delivery. Consequently,
we recommend that you only readjust grinding fineness after approximately 1,000
coffee preparation processes (about 1 year).
You can only set the grinding fineness
while the mill is running. Thus, adjust
grinding fineness directly after coffee dispensing starts.
If the coffee flavour is not intense enough, we recommend that you set a finer
grinding level.
• Place the lever (Fig.
B, No. 14) in one of the three positions
(as viewed from the rear of the appliance).
Lever position
Grinding fineness
Left
Fine
Centre
Medium
Right
Coarse
(factory setting)
Venting
Remove
water tank