En + drawings, Compatibility, How to put the harness on – Petzl SEQUOIA SRT User Manual

Page 3

Advertising
background image

3

C69AF0 SEQUOÏA SRT C695010C (280708)

4

Compatibility

5

How to put the harness on

Verify the compatibility of this product with the other
components of your equipment (compatibility = good
interaction when used together).

Compatibility between Attachment point and Connectors

An incompatible connection can cause accidental
disconnection, breakage, or affect the safety function of
another piece of equipment.
WARNING, the attachment points of your harness can act as
a lever on the gate of a connector. When a sudden tension
comes onto the rope and/or an external pressure on the
locking system, and the connector is poorly positioned, the
locking sleeve can break and the gate can open itself.
To reduce this risk:
1. Verify that the gate is securely closed and locked by
pressing it with your hand.
2. Check that your connectors are properly positioned each
time the system is loaded (lanyard, descender, etc.).
3. Make sure your connectors are compatible with the
attachment points (shape, size, etc.). Do not use any
connectors that have a tendency to stay in an incorrect
position.
Any equipment attached to your harness (anchors, locking
connectors, absorbers etc) must conform to EN standards.
For your safety, get into the habit of always making your safety
systems redundant.
Contact a Petzl distributor if you are uncertain about the
compatibility of your equipment.

!

Fast

- Long ends: pass them
through the lateral
rings then through the
retainers behind the
rings.

- Short ends: use
the retainers in front
of the adjustment
buckles.

Open the buckles on the leg loops. Open up the harness
(untwisting the straps if necessary) and holding it by the belt,
slip it on over your legs and pull it up to your waist.

5A. Adjust the

waist belt.

Adjust the belt by
pulling on the belt
straps. Stow the
excess webbing
neatly using the
strap retainers (fl at
against the waist
belt).

5B. Fasten and

adjust the leg loops.

Fasten the FAST buckles.
Be careful of foreign
bodies which can impede
the operation of the FAST
buckles (such as pebbles,
sand, clothing...). Check for
correct locking.
Stow the excess webbing
neatly using the strap
retainers (fl at against the
waist belt).

DoubleBack

Fast

Advertising