RIDGID SeeSnake DVDPak - Manual (Page 18)

Ridge Tool Company 16
SeeSnake ® DVDPak
Camera video image not
seen.
Flashing Battery Warning
appears.
No power to SeeSnake.
Connections faulty.
Display set to wrong source.
Batteries Low.
DVD
Pak
18 V batteries low.
Check power is correctly plugged in or battery is
charged.
Check switch on on DVD
Pak
.
Check connection to DVD
Pak
unit from SeeSnake.
Check seating, and pins in SeeSnake connection.
Set-up as described in Video Display Set-up.
Recharge batteries or connect external power sup-
ply.
Recharge DVD
Pak
batteries. Switch to AC power
(110/220VAC).
PROBLEM PROBABLE FAULT LOCATION SOLUTION
Chart 1 Troubleshooting