Installation, Installation safety, Safety – STIEBEL ELTRON psh 30 trend User Manual

Page 19: Appliance description, Preparations

Advertising
background image

En

gl

ish

www.stiebel-eltron.com

PSH Trend |

19

inSTALLATion

Safety

inSTALLATion

7. safety

Only a qualified contractor should carry out installation, commis-

sioning, maintenance and repair of the appliance.

7.1 general safety instructions

We guarantee trouble-free function and operational reliability only

if original accessories and spare parts intended for the appliance

are used.

7.2 instructions, standards and regulations

Note

Observe all applicable national and regional regulations

and instructions.

8. appliance description

8.1 standard delivery

The following are delivered with the appliance:

- Safety valve

The safety valve supplied must not be used in Belgium.

For use here please use standard safety valves (see also

pricelist).

8.2 accessories

Pressure-tested taps are available as accessories.

9. Preparations

9.1 installation site

The appliance is designed to be permanently wall-mounted to a

solid surface. Ensure the wall offers adequate load bearing ca-

pacity.
There should be a suitable drain near the appliance to drain off

the expansion water.
Always install the appliance vertically in a room free from the risk

of frost and near the draw-off point.
It may not be fitted in a corner since the screws for fixing the

appliance to the wall must remain accessible.

9.2 Fitting the wall mounting bracket

Note

Ensure that the temperature selector is accessible from

the front.

The mounting bracket attached to the appliance has hook-in slots,

which in most cases enables installation on the bolts that are

already in place from previous appliances.

f

f Otherwise, transfer the dimensions for the holes to be drilled

on the wall (see chapter "Specification / Dimensions and

connections").

f

f Drill the holes and secure the wall mounting bracket with

screws and rawl plugs. Select fixing materials in accordance

with the wall construction/condition.

f

f Hook the appliance with wall mounting brackets on to the

screws or bolts. Observe the weight of the appliance when

empty (see chapter "Specification / Data table") and, if neces-

sary, ask another person to help.

f

f Align the appliance horizontally.

Advertising
This manual is related to the following products: