FIAT Croma - Manual (Page 163)

162
W
ARNING
LIGHTS AND MESSAGES
CAR
TECHNICAL
INDEX
DASHBOARD
AND
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
Note Before replacing the drilled wheel
(if in alloy) in the specific housing, remo-
ve the snap-in logo holder pressing on it
from the its internal side.
❒ For vehicles with steel rims, remove
the pressure inserted wheel hub cap
D-fig. 6;
❒ loosen the bolts of the wheel to be re-
placed by about one turn with the
wrench provided E-fig. 7; if the car
is fitted with alloy rims, shake the car
to facilitate removing this rim from the
wheel hub;
❒ take out the space-saver spare wheel
B-fig. 4 to access the tool container
C-fig. 5;
❒ take out the tool container C-fig. 5
and take it near to the wheel to be
changed;
❒ remove the spacer set under the
space-saver spare wheel to house the
standard size wheel.
IMPORTANT: failing to observe this pre-
scription could cause boot floor breaking.
fig. 5 F0L0219m fig. 7 F0L0366m fig. 6
D
F0L0370m
157-192 Croma TRW GB 28-09-2007 14:14 Pagina 162