FIAT Croma - Manual (Page 46)

45
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
To store the required mirror position
proceed as follows:
❒ engage reverse with car stopped and
ignition key to ON;
❒ turn selector B (to select the passen-
ger door mirror);
❒ use selector C to adjust the passenger
door mirror as required to obtain best
position for parking manoeuvres;
❒ keep one of the seat storing/recalling
buttons pressed for 3 seconds at least;
Together with the passenger door mirror
“parking” position, also the driver seat and
door mirror positions will be stored.
The sound of a buzzer confirms that the
mirror position has been stored.
Recalling the “parking” position of
the passenger door mirror
To recall automatically the “parking” po-
sition of the passenger door mirror, pro-
ceed as follows:
❒ engage reverse with car stopped and
ignition key to ON;
❒ turn selector B to select the passen-
ger door mirror; the mirror will set
automatically to the previously stored
position.
If no parking position has been stored,
when engaging reverse the passenger door
mirror will slightly lower to aid the dri-
ver during parking.
The mirror will automatically return to its
original position in the following cases:
❒ 10 seconds after disengaging reverse;
❒ when the car speed exceeds 10 km/h
in forward gear ;
❒ when turning selector B to neutral po-
sition or to driver mirror position.
IMPORTANT “Parking” position can on-
ly be stored or recalled with ignition key
at ON.
Automatic door mirror
realignment
Each time the ignition key is turned to
ON, door mirrors return automatically to
the last position set and/or recalled at last
removal of the electronic key.
This enables mirror alignment if when
leaving the car parked one of the door
mirrors has been moved manually and/or
accidentally.
039-069 Croma TRW GB 28-09-2007 9:03 Pagina 45