FIAT Croma - Manual (Page 29)

28
SAFETY DEVICES
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
Note The possible setting is between 30
and 250 km/h, or between 20 and 155
mph depending on the unit set previous-
ly (see “Distance unit (Dist. Unit)” para-
graph described later. Every press on but-
ton +/– increases/decreases by 5 units.
Keeping the button +/– pressed obtains
the automatic fast increase or decrease.
When you are near the required setting
complete adjustment by single presses.
– briefly press button MODE to go back
to the menu screen or press the button
for long to go back to the standard screen
without storing settings.
To cancel the setting, proceed as follows:
– briefly press button MODE: (On) will
flash on the display;
– press button – : (Off) will flash on the
display;
– briefly press button MODE to go back
to the menu screen or press the button
for long to go back to the standard screen
without storing settings.
Speed Beep (Speed limit)
With this function it is possible to set the
car speed limit (km/h or mph); when this
limit is exceeded the driver is immediate-
ly alerted (see section “Warning lights and
messages”).
To set the speed limit, proceed as follows:
– briefly press button MODE, the display
will show wording (Speed Beep);
– press button + or – to select activation
(On) or deactivation (Off) of the speed
limit;
– if selecting (On), press button + or –
to select the required speed limit and then
press MODE to confirm.
DISPLAY FUNCTIONS
(see Multifunctional display or Reconfigurable multifunctional display)
001-038 Croma TRW GB 28-09-2007 14:06 Pagina 28