Rearview mirrors – FIAT Croma User Manual

Page 45

Advertising
background image

44

SAFETY DEVICES

CORRECT USE OF THE CAR

W

ARNING

LIGHTS AND MESSAGES

IN AN

EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICA

TIONS

INDEX

DASHBOARD AND CONTROLS

fig. 41

F

F

0L0012m

REARVIEW MIRRORS

DRIVING MIRROR fig. 41

The mirror is fitted with a safety device
that causes it to be released in the event
of a violent crash.

It can be moved using the lever A to two
different positions: normal or antiglare.

ELECTRO-CHROMIC DRIVING
MIRROR fig. 42

Certain versions are fitted with automat-
ic antiglare electro-chromic mirror. The
electro-chromic function is turned on/off
by pressing button ON/OFF in the low-
er section of the mirror. When this func-
tion is on, the mirror led will turn on.
When engaging reverse, the mirror will al-
ways set to daylight colouring.

DOOR MIRRORS fig. 43

Electrical adjustment

This operation is only possible with igni-
tion key at ON.

Proceed as follows:
❒ use switch B to select the mirror re-

quired (left or right);

❒ to adjust the mirror move the switch

C in the four directions;

Adjust mirrors with car stationary and
handbrake on. Mirror defrosting starts au-
tomatically when switching the heated
rear window on.

Storing the “parking” position of
the door mirror on the passenger
side

To improve visibility during parking ma-
noeuvres when engaging the reverse gear,
the driver can adjust/move (and store) the
passenger door mirror to a position dif-
ferent from that used during normal run-
ning.

fig. 42

F0L0310m

fig. 43

F0L0386m

039-069 Croma TRW GB 28-09-2007 9:03 Pagina 44

Advertising