FIAT Stilo - Manual (Page 123)

122
CORRECT USE OF THE CAR
W
ARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
FITTING THE ISOFIX TYPE SEAT
Groups 0 and 0+
For children of the 0, 0+ weight group (ba-
bies up to 13 kg), the child’s seat is facing
backwards and the child is restrained by
the child’s seat belts D-fig. 15.
As the child grows, passing to weight
group 1 (9-18 kg) refit it facing forwards
following the instructions provided with
the child restraint system.
For proper mounting proceed as follows:
❒ move the rear sliding seat fully back-
wards with the seat back at 4 th position,
as shown in fig. 16.
❒ check whether the release lever B-
fig. 15 is at rest position (inward);
❒ find the presetting brackets A, then po-
sition the child restraint system with
the fastening devices C aligned with the
brackets;
❒ push the child restraint system until
hearing locking clicks;
❒ check proper locking by moving the
child’s seat with force: the built-in safe-
ty mechanism actually inhibits improp-
er coupling with only one coupling
locked.
fig. 16 F0C0312m
fig. 15 F0C0268m
In case of rear fixed seat and
if the Isofix type restraint
system is set facing backwards, the
passenger’s seat will have to be pulled
back until it touches the seat restraint
system back. In case of rear sliding
seat, move the front seat forward to
a position from half its stroke forth.
WARNING