FIAT Stilo - Manual (Page 186)

185
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
DIPPED BEAM HEADLIGHTS
fig. 22
Gas-filled filament lamps
To change the bulb, proceed as follows:
❒ remove the protective cover releasing
the catch;
❒ release the bulb holder catch A;
❒ disconnect the electric connector B;
remove the bulb C and replace it;
Gas-discharge lamps (Xenon)
(where provided)
MAIN BEAM HEADLIGHTS fig. 23
To change the bulb, proceed as follows:
❒ remove the protective cover releasing
the catch;
❒ release the bulb holder catch A;
❒ disconnect the electric connector B;
remove the bulb C and replace it;
❒ fit the new bulb, making the tabs of the
metallic part coincide with the grooves
on the reflector, reconnect the electri-
cal connector B then hook the bulb
holder catch A;
❒ refit the protective cover correctly.
fig. 22 F0C0178m fig. 23 F0C0179m
Due to high voltage, the bulb
of (Xenon) gas-discharge
headlights must only be replaced by
experts: danger of death! Contact Fi-
at Dealership.
WARNING
❒ fit the new bulb, making the tabs of the
metallic part coincide with the grooves
on the reflector, reconnect the electri-
cal connector B then hook the bulb
holder catch A;
❒ refit the protective cover correctly.