Door locks – HONDA 2013 Ridgeline User Manual

Page 111

Advertising
background image

Push and hold the brake pedal,
and move the shift lever out of the
Park (P) position.

Push and hold the front of the
master door lock switch on the
driver’s door. You will hear a
click. Keep holding the
switch until you hear another
click (after about 5 seconds).

Push and hold the front of the
master door lock switch on the
driver’s door. You will hear a
click. Keep holding the
switch until you hear another
click (after about 5 seconds).

Turn the ignition switch to the
LOCK (0) position.

Make sure the shift lever is in the
Park (P) position.

Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.

Release the switch, and within 5
seconds, turn the ignition switch
to the LOCK (0) position.

Release the switch and, within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
Move the shift lever to the Park
(P) position.

1.

2.

3.

5.

4.

6.

3.

4.

Locks all doors when the vehicle’s speed
reaches about 10 mph (15 km/h).

To program the Drive Lock mode:

Door Locks

106

12/08/09 16:13:16 31SJC670_113

2013 Ridgeline

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

Advertising
This manual is related to the following products: