Installing a child seat – HONDA 2013 Ridgeline User Manual

Page 54

Advertising
background image

Route the tether strap downward
properly, making sure the strap is
not twisted.

Attach the tether strap hook to the
outer tether anchor on the outside
of the seat bottom.

Make sure to attach the tether
strap hook to the anchor before
installing the child seat, because
the tether anchor is positioned
behind the child seat.

Place the child seat on the rear
seat.

Push down the rear center head
restraint to the lowest position.

Route the tether strap over the
seat-back, lift the cover, then hook
the tether strap through the upper
guide as shown.

Route the tether strap downward
properly along the seat- back,
making sure the strap is
not twisted.

Tighten the strap according to the
seat maker’s instructions.

1.

2.

3.

4.

5.

3.

4.

CONTINUED

Installing a Child Seat

Using the Center Tether Anchor

49

UPPER GUIDE

CENTER TETHER ANCHOR

12/08/09 16:05:38 31SJC670_056

2013 Ridgeline

Dr
iv

er
and

P

asseng

er
Saf

e

ty

Advertising
This manual is related to the following products: