HONDA 2013 Ridgeline - Manual (Page 341)

Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Push down the inner fender.
Remove the electrical connector
from the bulb by pushing
Remove the bulb from the fog
light assembly by turning it one-
quarter turn counterclockwise.
Remove the bolts and use the flat-
tip screwdriver to remove the
holding clip located under the
front bumper.
2.
3.
4.
1.
Replacing Front Fog/Daytime
Running Light Bulbs
Lights
336
BOLTS INNER FENDER
TAB HOLDING CLIP
CONNECTOR
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
12/08/09 16:43:26 31SJC670_343
2013 Ridgeline
Ma
int
e
na
nce
on the tab and pulling the
connector down.