HONDA 2013 Ridgeline - Manual (Page 349)

Remove the blade from its holder
by grabbing the tabbed end of the
blade. Pull up firmly until the tabs
come out of the holder. Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the
new blade. Disconnect the blade assembly
from the wiper arm:
Press and hold the lock tab.
Slide the blade assembly toward
the lock tab until it releases
from the wiper arm.
3. 4. 5.
Wiper Blades
344
LOCK TAB
BLADE BLADE
REINFORCEMENT
12/08/09 16:44:31 31SJC670_351
2013 Ridgeline
Ma
int
e
na
nce