Cd changer (models without navigation system) – HONDA 2013 Ridgeline User Manual

Page 193

Advertising
background image

To remove the disc currently in play,
press the eject button (

). When

a disc is removed from a slot, the
system automatically begins the load
sequence so you can load another
disc in that position. If you do not
remove the disc from the changer
within 10 seconds, the disc will
reload into the slot. Then the system
returns to the previous mode [AM,
FM, or XM (if equipped)].

To remove a different disc from the
changer, first select it with the
appropriate preset bar. When that
disc begins playing, press the eject
button. Continue pressing the eject
button to remove all the discs from
the changer.

Press the eject button (

) to

remove the disc. If you eject the
disc, but do not remove it from the
slot, the system will automatically
reload the disc after 10 seconds.
To begin playing, press the CD or
CD/AUX button.

You can also eject the disc when the
ignition switch is off.

To play the radio when a disc is
playing, press the AM/FM or XM (if
equipped) button. Press the CD
(CD/AUX on models with XM
satellite radio) button again to switch
back to the CD changer.

If you turn the system off while a
disc is playing, either with the PWR
button or by turning off the ignition
switch, the disc will stay in the
drive. When you turn the system
back on, the disc will begin
playing where it left off.

For information on how to handle
and protect compact discs, see
page

.

You can also eject discs when the
ignition switch is on or off:

To eject one disc, press and release
the eject button.

To eject all discs, press and hold the
eject button until the LOAD
indicator begins to blink.

198

Removing Discs f rom the In-dash
Disc Changer

To Stop Playing a Disc

Protecting Discs

CD Changer (Models without navigation system)

188

12/08/09 16:24:06 31SJC670_195

2013 Ridgeline

Fe
a

tu

re

s

Advertising
This manual is related to the following products: