JVC KW-NT1 - Manual (Page 41)

5
1
2
3
4
p 6
7
8
9
q
w
e
r
t
39
ENGLISH
Checking the information of the navigation system
1 2
8 Version of the map database
9 Version of the voice guidance database
p Connection status of the ILLUMINATION CONTROL
lead
<On>: The illumination signal is detected.
q Connection status of the PARKING BRAKE lead
<On>: The parking brake is engaged.
w Connection status of the REVERSE GEAR SIGNAL
lead
<On>: Reverse gear signal is detected.
• If the rear view screen is displayed when shifting
the gear to the reverse (R) position, the reverse
gear signal is detected (<On>).
e Status of the gyroscope
r Speed pulse rate
t Status of calibration *
2 * 3
<Processing>: The current position cannot be
determined without data from GPS satellites.
<Learning>: The current position can be
determined even when the System cannot receive
data from GPS satellites.
<Learned>: The current position can be
determined accurately even when the System
cannot receive data from GPS satellites.
* 1 These information may not be shown correctly when
the reception of GPS signals is poor.
* 2 The calibration does not function without the
connection of GPS aerial and the speed signal lead.
For the connection,
☞ Installation/Connection
Manual (separate volume).
* 3 Driving under various conditions completes the
calibration faster. If <Processing> remains on the
screen for long period, check the connection of the
GPS aerial and the speed signal lead.
GPS
1 Current speed * 1
2 Direction of the car * 1
3 Latitude and longitude of your current position * 1
4 Altitude of your current position * 1
5 Date/Local time
• When the System cannot receive the GPS signals, the
value of each item above are shown as “- -.”
System
6 Name of the unit
7 Version of the software
Satellites
(Green): Receiving the GPS signals and used for the
calculation.
(Yellow): Receiving the GPS signals.
(Grey): Not receiving the GPS signals.
EN_KW-NT1[E]3.indb 39 EN_KW-NT1[E]3.indb 39 09.5.29 1:14:34 PM 09.5.29 1:14:34 PM