JVC KW-NT1 - Manual (Page 82)

80
ENGLISH
You can copy the phone book memory of a mobile
phone into the unit (up to 100 memories).
1
Display <Call Menu>. (
☞ page 78)
2
3
Operate the target mobile phone.
• To cancel the transfer, press [Finish].
4 Finish the procedure.
The phone book memory is copied from the mobile
phone.
• If you try to copy a 101st phone book entry,
“Memory Full” appears. Delete unwanted names
before copying.
<Call Menu> is displayed.
• Once you start copying the phone book, you
cannot make/receive call while <Call Menu>
screen is displayed. To use the mobile phone,
reestablish the connection by pressing
[
].
– When <Auto Connect> is set to
<Off>, connect the mobile phone again.
(
☞ page 76).
Deleting the memory in the
<Call Menu>
1
Display <Call Menu>. (
☞ page 78)
2
3
Select the items (1, 2), to delete them
(3).
• The selected items are marked with “
✔.”
A confirmation message appears.
Selects all phone numbers in the selected item
Editing the phone number memory
Numbers of the phone book memories copied
PIN code (initial: 0000)
Copying the phone book
EN_KW-NT1[E]3.indb 80 EN_KW-NT1[E]3.indb 80 09.5.29 1:15:27 PM 09.5.29 1:15:27 PM