Disc operations – JVC KW-NT1 User Manual

Page 52

Advertising
background image

+

50

ENGLISH

~

Insert a disc.

The source changes to “DISC” and playback starts.

Disc operations

When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.
• You can fully enjoy multi-channel sound by connecting an amplifier or a decoder compatible with these multi-

channel sources. (

☞ also page 71)

Label side

If “

” appears on the screen, the unit cannot accept the operation you have tried to do.

• In some cases, without showing “

,” operations will not be accepted.

Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.

Caution on volume setting:

To eject a disc

• You can eject a disc when playing other AV source.
• If the ejected disc is not removed within 15 seconds,

the disc is automatically inserted again into the
loading slot to protect it from dust.

To prohibit disc ejection

1

2

Press and hold AV MAP and any part of the

screen.

A confirmation message appears.

To cancel the prohibition, repeat the same
procedure.

[Hold]

[Hold]

On <AV Menu>

• If a disc does not have any disc menu, all tracks on it

will be played repeatedly until you change the source
or eject the disc.

EN_KW-NT1[E]3.indb 50

EN_KW-NT1[E]3.indb 50

09.5.29 1:14:50 PM

09.5.29 1:14:50 PM

Advertising